Systems for coating liquid and powder coating booths pressured booths, automatic booths

DuPontÖ Teflon« industrial coatings are available in both powder and liquid. The versatility of these Teflon« coatings allows for almost unlimited application to a wide variety of part sizes and configurations, always adding value far beyond the inherent nonstick qualities.
Teflon« industrial coatings spray on like paint and bake to a tough, inert finish. Over the years, DuPont technology has extended the family of Teflon« coatings to ensure a finish with the ideal combination of properties to meet most design needs.
By combining heat resistance with almost total chemical inertness, excellent dielectric stability, and a low coefficient of friction, Teflon« coatings offer a balance of properties unbeatable by any other material. It is the original nonstick finish. DuPont, the originator of Teflon«, has the worldwide resources to help you solve your coating challenges. If nothing sticks to Teflon - how does Teflon stick to the pan?
How does Teflon stick to the pan?
Teflon, the non-stick coating used on pots and pans, holds the title in the Guiness Book of World Records as being the slipperiest substance on earth.
Scientifically speaking, Teflon will not chemically bond to anything, but can be forced mechanically into small nooks and crannies. This slippery substance adheres to their surfaces once manufacturers sandblast them to roughen them, apply a primer, and embed the Teflon into the primer.
DuPont scientist, Dr. Roy Plunkett, accidentally created the recipe for Teflon in 1938, while attempting to produce a better coolant gas than the one currently on the market. In doing so, he toyed with different combinations of gases and, either accidentally or intentionally, left one batch of gasses in a container overnight. Upon arrival at work the following morning, he found that the gasses in the container had vaporized, and in their stead, found a slippery, waxy solid, which remained intact when exposed to corrosive chemicals which normally eat through things with which they come into contact.
The substance Dr. Plunkett discovered in the container that day was tetrafluoroethylene (PTFE), a solid version of fluorocarbons, or freon. For pronunciations sake, the doctor shortened the name for the substance to Teflon, but even the abbreviated name failed to nudge DuPont into production of the product.
In fact, DuPont waited until 1948, ten years after Teflons discovery, before beginning its production for commercial applications.
As DuPont dragged its heels in launching Teflon, a Parisian named Marc Gregoire learned of it, and successfully applied it to his fishing tackle to prevent the line from tangling. At his wifes urging, he managed to apply Teflon to her pots and pans, and within several years, this entrepreneur sold in excess of one million Tefal (his name for Teflon) coated pots and pans.
The concept of Teflon coated pots and pans did not stick in America. When UPI reporter Thomas Hardie encountered one of these coated pans, when visiting a friend who had just returned from Paris, he saw a niche in the American market for the slick pots and pans, and immediately contacted Marc Gregoire in Paris. Hardie pitched these pots and pans to every major U.S. manufacturer of cooking utensils to no avail. His next move in his quest for a buyer was to import 3,000 of the pots and pans, with the goal of selling them to all major department stores. Once again, he hit a roadblock until, finally, he convinced a buyer at Macys Herald Square to take 200 pans off of his hands. All sold within two days, despite a major snowstorm.
Hardie had finally arrived, and could not keep up with the demand for his product. While building a manufacturing plant to produce the product, other manufacturers of pots and pans took advantage of Hardies moment of silence on the scene, seized the opportunity, and manufactured their own coated pots and pans.
Today, the use of Teflon coating is firmly embedded in America, and extends beyond pots and pans to include bakeware and other kitchen utensils. Hardies initiative and staying power paid off handsomely.

´╗┐

Coating to protect against external influences, or to beautify the appearance of the surfaces of objects covering the operation of another substance. Kaplamac─▒l─▒kta as a means of coating used in many procedures.
Metal coating: metal or non-metallic anti-corruption bodies, surfaces or abrasion-resistant metal covered many times. Cleaned and prepared before the coated surface. Coating process, spraying, dipping, diffusion, gas and vacuum is performed within the means of condensation.
Surrface Preparation: Before the coating process of organic and inorganic contaminants and oxide layers coated surfaces must be cleaned thoroughly. For this, the metal surface, immersed in the appropriate solvent or solvents to clean the surface by spraying the surface of foreign substances. Alkaline detergent is used according to the type of dirt or acid solutions. If necessary, they will contribute to the high pressure injection into the corrosive salts utilized fine. Electrolysis method may be applied. Oxide layer of steel and removal of 65-85 ┬░ C temperature reduction as a matter of 15% 10-sulfate acid (H2SO4) solution or dilute hydrochloric acid at 20 ┬░ C is used.

Mechanical cleaning: Aluminum oxide or silicon carbide abrasive stone and dust, sand paper or cloth surface to smooth and covered by dirt, foreign material removed. The surface is sprayed with steam under pressure, or abrasive powders or etching the surface of a rotating drum is provided in the covered parts.

Chemical cleaning: This method of acid etched metal surfaces, da─član─▒r, chemical or electrochemical polished way. Copper surfaces are usually persulphates, chromate compounds, or salts of iron oxide by using three da─član─▒r. Chemical polishing of zinc and aluminum, such as nitric and phosphoric acid is carried out by immersion into a strong oxidizing acid solutions. Electro-polishing of the aluminum, iron, steel, stainless steel, zinc, various alloys, electrolytic copper anode connects to the bathroom.

Metal Coating Operations

Injection: In case the corresponding metal or metal alloy powder or wire coated with a gun to the surface is sprayed is melted. Spray coating through the two most widely used metals, zinc and aluminum. More liquid metal spray tanks, used for coating of steel structures in place.

Hot-dip: coated metal surface, after cleaning the molten metal dald─▒rlarak surface diffusion (diffusion) through the coating is provided. For this purpose, as metal coatings, zinc, tin, lead and aluminum is used. Steel, zinc is dipped galvanized. Zinc can also be used instead of tin. Thin sheets of iron from tin cans are immersed. To avoid surface oxidation during the process, the appropriate fluxes, using the surface air in contact with hydrogen or inert gases are cut off.

Cementation or diffusion coating: coated metal, put into powder coating the metal is heated to be used. Environment oxidation, anti-substances in contact with air, inert gases are kept. For example, with a metal coating of aluminum diffusion of the means by which metal parts kalorizasyon process, in which the aluminum powder is placed in a rotating drum. Sementasyonunda iron temperature is 850 ┬░ -950 ┬░ C. This way of iron with zinc kaplanmas─▒na ┼čerardizasyon (shererdization) is called. Chrome plating is done with it is called kromizasyon.

Pin (Percussion), coating (Peen plating): coated metal parts, metal powders used in coating solution and an activator in conjunction with a rotary drum is placed inside. There is also the effect of metal parts falling within the pulse of the drum. Washer (washer), nails, small pieces of chain with this method, such as zinc, brass and is coated with cadmium.

Gas coating: Coating of metal used for the gaseous compound, usually carbonyl, while the coated object is heated body. Hot on the surface of metal atoms separated from the gaseous compound is collected on the surface. This procedure than chromium and iron-plated nickel coating can be sometimes.

Vacuum condensation: this method of casting metals and plastics can be coated with metal. To be used for coating metal is evaporated in vacuum by heating with tungsten heater. Track surface is coated, cleaned, adjusted and polished the metal vapor within the cell are rotated. Metal vapor condenses on the surface of the cold part. Aluminum, gold, silver and other metals buharla┼čt─▒r─▒labilen used for this purpose. This is not sort of wear-resistant coatings, also coated with a lacquer.

Chemical reduction through the coating (Electroless): Water-soluble silver, gold and copper salts in an aqueous medium with a strong reducing effect through the reduction of the glass (as in the construction of the mirror), plastics and metals can be covered.

Chemical coating by means of substitution: Fields, the displacement solution through the copper, gold, silver and coated with tin. Coating thickness is very thin (2.5 x10-6 mm).

Plated by electrolysis (Electroplating): coated metal or plastic track surface was made conductive, the metal salt solution used for coating in the cathode connected to the metal cations, coated on the surface by the accumulation is performed by passing an electric current. (See Electrolysis)

One of about 33 with the metal, in aqueous solutions, electrolysis can be plated. Other metals plated with molten salts or organic electrolytes to do is electrolysis. The coating of metal with about 15 commercial purposes. Some of these are: Copper, silver, zinc, gold, platinum, cadmium, tin, lead, chromium and nickel
´╗┐Surface Treatment Of Aluminum And Aluminum Alloys
Abstract:
Aluminum alloys are divided into two major categories: wrought and casting alloys. A further differentiation for each category is based primary on mechanism of property development. Many alloys respond to thermal treatment based on phase solubility. These treatments include solution heat treatment, quenching and precipitation, or age hardening.
In order to improve surface properties of final products, such as wear resistance, corrosion resistance, reflectivity etc., different types of surface treatment were designed. All of them are divided into several groups, such as electrochemical treatments, chemical treatments and coatings. In this article their terms and definitions will be explained.
Aluminum alloys are divided into two major categories: wrought and casting alloys. A further differentiation for each category is based primary on mechanism of property development. Many alloys respond to thermal treatment based on phase solubility. These treatments include solution heat treatment, quenching and precipitation, or age hardening.
In order to improve surface properties of final products, such as wear resistance, corrosion resistance, reflectivity etc., different types of surface treatment were designed. All of them are divided into several groups, such as electrochemical treatments, chemical treatments and coatings. In this article their terms and definitions will be explained.
Electrochemical treatment
Electrochemical brightening: Electrochemical treatment to improve the optical reflectivity of a surface.
Electropolishing: Polishing of a metal surface by making it anodic in an appropriate electrolyte.
Anodized metal Metal with an anodic coating, produced by an electrolytic oxidation process in which the metal is converted to a mainly oxide coating having protective, decorative or functional properties.
Clear anodized metal: Metal with a substantially colorless, translucent anodic oxidation coating.
Color anodized metal: Anodized metal colored either during anodizing or by subsequent coloring processes.
Integral color anodized metal: Metal that has been anodized using an appropriate (usually organic acid based) electrolyte which produces a colored coating during the anodizing process itself.
Electrolytically colored anodized metal: Metal with an anodic oxidation coating that has been colored by the electrolytic deposition of a metal or metal oxide into the pore structure.
Dyed anodized metal: Metal with an anodic oxidation coating colored by absorption of dye-stuff or pigments into the pore structure.

Combination color anodized metal: Metal with an anodic oxidation coating that is colored by electrolytic coloring or produced by integral color anodizing followed by absorption dyeing.
Interference color anodized metal: Metal with an anodic oxidation coating colored by means of optical interference effects.
Bright anodized metal: Anodized metal with a high specular reflectance as the primary characteristic.
Protective anodizing: Anodizing where protection against corrosion or wear is the primary characteristic and appearance is secondary or of no importance.

Decorative anodizing: Anodizing where a decorative finish with a uniform or a esthetically pleasing appearance is the primary characteristic.

Architectural anodizing: Anodizing to produce an architectural finish to be used in permanent, exterior and static situations where both appearance and long life are important.

Hard anodized metal: Anodized metal on which the anodic oxidation coating has been produced with wear and/or abrasion resistance as the primary characteristic.

Sealing: Treatment of anodic oxidation coatings on metal to reduce porosity and the absorption capacity of the coating by hydrothermal processes carried out after anodizing.

Cold impregnation: Treatment of anodic oxidation coatings on metal to plug the pores and reduce the absorption capacity of the coating by chemical processes carried out at low temperatures after anodizing.

Significant surface: The part of the product covered or to be covered by the coating and for which the coating is essential for serviceability and/or appearance.

Chemical treatment
Chemical brightening: Chemical treatment to improve the optical reflectivity of a surface.

Chemical polishing: Polishing of a metal surface by immersion in a solution of chemical reagents.

Degreasing: Removal of oil or grease, usually by a suitable organic solvent or an aqueous detergent.

Etching: Roughening of the surface of a metal by overall or selective dissolution in acid or caustic media.

Pickling: Removal of a thin surface layer of a metal by chemical action, mainly by treatment in a caustic solution.

Coating

Coating (organic): Method in which a coating material is applied on a metallic substrate. This process includes cleaning and chemical pre-treatment and either:

* one-side or two-side, single or multiple application of liquid or powder coating materials which are subsequently cured or
* laminating with plastic films.

Coil coating: Continuous coating of a metal strip.

Backing coat: Single coating of any type with no particular requirements for appearance, malleability, corrosion protection, etc. usually on the reverse side of the coated product.

Chemical conversion coating: Treatment of a metal with chemical solutions by dipping or spraying to build up an oxide film containing chromates or phosphates.

Priming: Application of a priming paint often pigmented with a corrosion inhibitor such as zinc chromate, after suitable pretreatment.

Pretreatment priming: Application of a solution containing a resin, a chromate and an acid, which is allowed to dry on and provide the key for subsequent painting.

Single coat system: Single coating either with requirements on appearance, malleability, corrosion protection, subsequent painting, etc., or as a primer with special properties regarding adhesion and corrosion protection for post-painting applications.

Multiple coat system: System comprising a primer or a base coat, possibly intermediate coat(s), and a top coat with particular requirements on appearance, malleability, corrosion protection, etc.

Organic coating: Dry paint film of the coated product or the organic film metal laminate.

Film coating: Organic film applied to a substrate to which an adhesive and, if appropriate, a primer has been applied beforehand.

Lacquering: Coating with a formulation based on a dissolved material which forms a transparent layer primarily after drying by evaporation of the solvent.

Painting: Coating with a non-transparent formulation containing pigments
This RSS feed URL is deprecated, please update. New URLs can be found in the footers at https://news.google.com/news


Washington Post

Why Republicans shouldn't be so optimistic their tax bill will be a big win
Washington Post
Republicans are on the verge of passing a massive tax cut for businesses that is deeply unpopular with the American public. They are doing it with no Democratic votes and at a moment when the U.S. economy looks pretty healthy (typically, tax cuts are ...
Homeowners Have Had It Good. Too Good, Says the Tax Bill.New York Times
Flush with momentum, GOP speeds toward tax votesThe Hill
Key features of the Republicans' final tax billNBCNews.com
The Atlantic -Forbes -Bloomberg -Politico
all 3,769 news articles »


CNN

Trump transition accuses Mueller of improperly obtaining emails
CNN
Washington (CNN) Lawyers representing the Trump presidential transition wrote to members of Congress accusing special counsel Robert Mueller of obtaining unauthorized access to tens of thousands of transition emails, including what they claim to be ...
Trump Russia inquiry: Mueller improperly obtained emails, lawyer saysBBC News
Trump Allies Flip Out After Mueller Lands Tens Of Thousands Of EmailsHuffPost
Mueller Obtains Thousands of Trump Transition EmailsVoice of America
The Guardian -Politico -NECN -Aljazeera.com
all 492 news articles »


Washington Post

Words banned at multiple HHS agencies include 'diversity' and 'vulnerable'
Washington Post
The Trump administration has informed multiple divisions within the Department of Health and Human Services that they should avoid using certain words or phrases in official documents being drafted for next year's budget. Officials at the Centers for ...
Word ban at CDC includes 'vulnerable,' 'fetus,' 'transgender'CNN
Uproar Over Purported Ban at CDC of Words Like 'Fetus'New York Times
Trump Administration Reportedly Instructs CDC On Its Own Version Of 7 Dirty WordsNPR
USA TODAY -The Hill -HuffPost -Boston Herald
all 222 news articles »


New York Times

'SNL' Takes On Omarosa Resignation (or Firing?)
New York Times
ÔÇťSaturday Night LiveÔÇŁ got in the holiday ÔÇö er, sorry ÔÇö Christmas spirit in this week's cold open, the last of the year. President Trump, performed as usual by the frowning Alec Baldwin, and the first lady, Melania Trump, played by Cecily Strong ...
Omarosa tries crashing Trump's Christmas message in spoof of firing on 'Saturday Night Live'New York Daily News
Saturday Night Live' decorates the Christmas tree with Trump, skewers Roy MooreNBCNews.com
Scarlett Johansson's 'SNL' Cameo As Ivanka Trump Pokes Fun At Christmas At The White House ÔÇö VIDEOBustle
USA TODAY -HuffPost -Atlanta Journal Constitution -The Guardian
all 79 news articles »


Newsweek

North Korea's Kim Jong Un Wants to Blow up the World Because His Father Wasn't Nice to Him
Newsweek
Kim Jong Un may never have had the chance to enrage President Donald Trump, threaten the world with nuclear war or lead the charge in dozens of human rights violations if not for his complicated relationship with his father, Kim Jong Il. Kim Jong Il ...
Campaigner predicts North Korea 'peace offensive' despite US standoffNBCNews.com
North Koreans mark 6th anniversary of Kim Jong Il's deathFox News
US Naval Academy discovers 150 year-old battle flags taken from Kim Jong Un's ancestorsBusiness Insider
Daily Star -VVdailypress.com -UPROXX -Yahoo News UK
all 49 news articles »


New York Times

Glowing Auras and 'Black Money': The Pentagon's Mysterious UFO Program
New York Times
WASHINGTON ÔÇö In the $600 billion annual Defense Department budgets, the $22 million spent on the Advanced Aerospace Threat Identification Program was almost impossible to find. Which was how the Pentagon wanted it. For years, the program investigated ...
Head of Pentagon's secret 'UFO' office sought to make evidence publicWashington Post
NY Times: Pentagon study of UFOs revealedCNN
Pentagon secretly set up program to investigate UFOs at Harry Reid's urging, reports sayFox News
CNBC -The Hill -New York Post -BBC News
all 86 news articles »


Los Angeles Times

Hundreds of homes in Montecito threatened as winds push Thomas fire toward coast; new evacuations
Los Angeles Times
New evacuation orders were issued in Santa Barbara County on Saturday as the massive Thomas fire took aim at the hills above Montecito, with some wind gusts reported up to 65 mph. The so-called sundowner winds pushed south from the mountains down to ...
Mild temperatures heading to the Northeast, strong winds and low humidity complicate firefighting in Calif.ABC News
Ferocious California wildfire grows more erratic, dangerous as winds pick upUSA TODAY
Thomas Fire Spreads Rapidly to Santa Barbara CountyNew York Times
Washington Post -Chicago Tribune -Reuters -U.S. News & World Report
all 607 news articles »


New York Times

Nevada Democrat Facing Harassment Accusations Will Not Seek Re-election
New York Times
WASHINGTON ÔÇö Representative Ruben Kihuen, a freshman Democrat from Nevada who has been accused of sexual harassment, said Saturday that he would not seek re-election. He is the fifth member of Congress in the past two weeks whose career has been ...
Dem Rep. Kihuen won't seek re-election amid sexual harassment claimsFox News
Kihuen will not seek reelectionPolitico
Democratic Rep. Kihuen won't seek re-election amid sexual harassment claimsNBCNews.com
The Hill (blog) -ABC News -U.S. News & World Report -New York Post
all 154 news articles »


Baltimore Sun

Baltimore County cemetery hosts emotional Wreaths Across America event
Baltimore Sun
Hundreds of people volunteered Saturday to place wreaths on the graves of 3,500 veterans at Dulaney Valley Memorial Gardens in Timonium, part of the national Wreaths Across America effort. (Steve Ruark / Baltimore Sun Media Group). Jeff BarkerContact ...
In day's endeavor, 1.5 million wreaths placed to honor fallenArkansas Online
Veterans honored during holidays at wreath ceremony in Corona del MarOCRegister
Volunteers lay Christmas Wreaths on veterans graves in PainesvilleNews-Herald.com
Fox News -Press Herald -Knoxville News Sentinel -CapitalGazette.com
all 481 news articles »


Hollywood Life

Virginia Woman, 22, Mauled To Death By Her Pet Pit Bulls & Father Tragically Finds Her Remains
Hollywood Life
Truly horrifying. A 22-year-old woman named Bethany Lynn Stephens was attacked and killed by her very own dogs. Here's all the details. Bethany Lynn Stephens was last seen alive on Tuesday, Dec. 12, when she set out with her 2 pit bulls to go for walk ...

and more »

Google News